R&S RTO6 - Page 680

Protocol analysis
R&S
®
RTO6
680User Manual 1801.6687.02 ─ 05
"Sleep"
Searches for a sleep frame.
Y
ou can refine the search condition, see:
●
"NM"
on page 681
●
"CT" on page 681
●
"Data" on page 681
●
"Index" on page 681
"Long"
Searches for a long frame.
Y
ou can refine the search condition, see:
●
"Frame ID"
on page 680
●
"NM" on page 681
●
"CT" on page 681
●
"DLC Extend" on page 681
●
"Data" on page 681
●
"Index" on page 681
"Long Poll"
Searches for a long poll frame.
Y
ou can refine the search condition, see:
●
"Frame ID"
on page 680
●
"NM" on page 681
●
"CT" on page 681
●
"DLC Extend" on page 681
●
"Data" on page 681
●
"Index" on page 681
"PID"
Searches for a PID field. You can refine the frame identifier, see
"Frame ID" on page 680
.
"PTYPE"
Searches for a PTYPE field
"PTYPE + PID"
Searches for a PTYPE field followed by a PID field. Y
ou can refine
the frame identifier, see
"Frame ID" on page 680.
Remote command:
SEARch:TRIGger:CXPI:
TYPE on page 1952
Frame ID
Searches for a frame identifier pattern or a frame identifier range. The setup consists of
the condition and one or two frame patterns.
The frame identifier setup settings are the same as in the CXPI trigger setup, see
"Frame ID" on page 676.
Remote command:
SEARch:TRIGger:CXPI:FID:CONDition on page 1951
SEARch:TRIGger:CXPI:FID:MAX on page 1952
SEARch:TRIGger:CXPI:FID:MIN on page 1952
DLC
Searches for a DLC pattern or a DLC range. The setup consists of the condition and
one or two DLC patterns.
The DLC setup settings are the same as in the CXPI trigger setup, see "DLC"
on page 677.
CXPI (option R&S RT
O6-K520)