Xerox DocuColor 12/DCCS50 User Manual

1/05
8a-4
DocuColor 12/DCCS50
07-289 HCF Broken Failure RAP , 07-308 Interlock
Reissue
High Capacity Feeder
YN
Check for +24VDC between pins 13 and 17 of P/J45 on the Distribution PWB.
+24VDC is measured between pins 13 and 17 of P/J45 on the Distribution
PW
B.
YN
G
o to Wirenet +24 VDC-1 Figure 29.
Go to F
lag 2 on
BSD 8.13. Check the connectors and wiring.
Replace the HCF Control PWB (PL 15
.16).
Go to Flag 1 on BSD 7.
12. Check the connectors and wiring. If the connectors and wiring
are OK, then replace the HCF Elevator Motor Assembly (PL 15.16)
Check/replace the following parts in the order listed until t
he problem is resolved. Replace any
parts that are worn, broken, binding, or slipping:
• Elevator Motor (PL 15.16)
• HCF
Stack Height Sensor (PL 15
.12)
• HCF Feeder Assembly (PL 15
.10)
• HCF Assembly (PL 15.1)
• Wiring Harness
07-308 Interlock Switch Open RAP
HCF Interlock is open.
Initial Actions
Ensure that the HCF is properly aligned and pushed tightly against the IOT.
Refer to BSD 7.12 and 8.13 in the following procedure.
Procedure
Enter dC330, 007-308 HCF Interlock Switch and press Start.
Move the HCF away from the machine. The displays changes.
YN
Check for +5VDC between pins NO and C of P/J-847 on the HCF Interlock Switch.
+5VDC is measured between pins NO and C of P/J-847on the HCF Interlock Switch.
YN
Check for +5VDC between pins 1 and 2 of P/
J843 on the HCF
Control PWB.
+5VDC is measured between pins 1 and 2 of P/J843
.
YN
Check for +5VDC between pins 3 and 4 of J2
HCF Cont
rol PWB. +5VDC is
measured between pins 3 and 4 of J2.
YN
Check for +5VDC between pins 20 and 9 of P/J44 Distribution PWB.
+5VDC is measured between pins 20 and 9 of P/J44.
YN
Go to Wirenet +5 VDC-1 Figure 7.
Go to F
lag 3 on BSD8.13 and check the connector and wiring for an open
circ
uit.
Replace the HCF Control PWB (PL 15.16
).
Go to Flag 2 on BS
D7.12 and check the connector and wiring for an open circuit.
Replace the HCF Interlock Switch (PL 15.1).
Ensure that there are no obstacles in the docking area of HCF or the machine.
A B
manuals4you.commanuals4you.com

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English