1/05
4-176
DocuColor 12/DCCS50
REP 13.5.1
Reissue
Repairs and Adjustments
REP 13.5.1 Vertical LED/Sensor
Parts List on PL 13.5 PL 13.9
Removal
WARNING
Turn power off and disconnect the power plug.
1. Remove the following parts:
a. Rear Cover (PL 13
.4)
b. Exit Cover (PL 13.4)
c. T
op Cover (PL 13
.4)
2. Open the front cover.
3. Remove the Vertical LED (Figu
re 1).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
3. Remove the screw.
4. Remove the Vertical LED.
Figure 1 Remove the Vertical LED
4. Remove the Vertical Sensor (Figu
re 2).
1. Remove the screws (4) on the both sides.
2. Decline the chute to the right side.
3. Remove the screw.
4. Remove the Vertical Sensor.
Figure 2 Remove the Vertical Sensor
Installation
1. Reinstall the parts in the reverse order of disassembly.
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
