1/05
8a-25
DocuColor 12/DCCS50
REP 2.8.39, REP 2.8.40
High Capacity Feeder
Reissue
REP 2.8.39 HCF One-Way Feed/Gear Clutch
Parts List on PL 15.14
Removal
WARNING
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Paper Tray Assembly (REP 2.7.
5).
2. Remove the HCF Feeder Assembly (REP 2.8.
27).
3. Remove the One-Way Feed/Gear Clutch (Figu
re 1).
Figure 1 Removing the Feed/Gear Clutch
Replacement
1. Reverse the above procedures to replace the One-Way Feed/Gear Clutch.
REP 2.8.40 HCF Friction Clutch
Parts List on PL 15.15
Removal
WARNING
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Paper Tray Assembly (REP 2.7.
5).
2. Remove the Friction Clutch (Figure 1).
Fi
gure 1 Removing the Friction Clutch
Replacement
1. Reverse the above procedures to replace the Friction Clutch.
3. Remove the C-clip and Gear
4. Remove the Feed and
Gear Clutch
1. Remove the Front Chute
2. Push the Lock Tab and slide
the Feed Roll off shaft
2. Remove the Spacer
1. Push the Release
Tab and slide the
Retard Roll off shaft
3. Remove the Friction Clutch