Xerox DocuColor 12/DCCS50 User Manual

1/05
6-25
DocuColor 12/DCCS50
dC122 Shutdown History
General Procedures
Reissue
dC122 Shutdown History
Purpose
1. To display the Last 40 Faults (History) without categorization.
2. To categorize the faults (document jams [DADF], paper jams and failures) and displays
their hist
ories.
NOTE:
1. A fault detected while in Service Mode is not counted. An Interlock Open detected while
the machine
is being stopped is not counted.
2. If multiple faults occurred in the machine, the primary fault is recorded. (Primary fault: The
firs
t fault occurred.)
3. To clear data select Compl
ete Closeout in the Service Mode Exit screen (dC188). Exit-
ing from the Service Mode clears all data in the Shut-Down History.
Procedure
Last 40 Faults History
1. Enter the Serv
ice Diagnostics Mode. Refer to Entering the Service Diagnostic Mode
using the PWS.
2. Select the Diagn
ostics Tab.
3. Select Last
40 Faults History in the Shut-down History screen. Last 40 Faults History is
the default screen.
4. The information in the lower right corner of the screen (Input, Original, Paper, Tray, Out-
put) reflects the fault highlighted in the Table.
a. Based on data read from the machine, the system displays the copy count when
each of th
e last 40 faults occurred.
b. The system displays the Last 40 Faults that occurred in Customer Mode after the
data was
cleared upon completing the last Complete Closeout.
Last 40 Faults Occurrences
1. Enter the Service Diagnostics Mode. Refer to Ent
ering the Service Diagnostic Mode using
the PWS
2. Select the Diagn
ostics Tab. dC122 displays as the default screen.
3. Select Last
40 Fault Occurrences.
a. Based on data read from the machine, the system displays the number of occur-
rences of the last 40 faults.
b. The system displays the last 40 faults that occurred in Customer Mode after the data
was cleared upon completing
the last operation.
DADF Jams
1. Enter the Service Diagnostics Mode. Refer to Ent
ering the Service Diagnostic Mode using
the PWS.
2. Select DADF Jams
in the Shutdown History Screen.
a. Based on data read from the machine, the system displays the DADF Jams.
b. The system displays the last DADF Jams that occurred in Customer Mode after the
data was
cleared upon completing the last operation.
Paper Jams
1. Enter the Serv
ice Diagnostics Mode. Refer to Entering the Service Diagnostic Mode
using the PWS.
2. Select Paper Jam
s in the Shutdown History screen.
a. Based on data read from the machine, the system displays the Paper Jam History.
b. The system displays the last 20 Paper Jam Faults that occurred in Customer Mode
after t
he data was cleared upon completing the last operation.
Failures
1. Select Fail on t
he Shutdown History Screen. The system displays the fault screen.
a. The system displays the Non-paper faults that are included in the Last 40 Faults His-
tory.

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English