1/05
6-88
DocuColor 12/DCCS50
dC131 IBT NVM List (771), dC131 Drive NVM List (772)
Reissue
General Procedures
dC131 IBT NVM List (771), dC131 Drive NVM List (772)
Table 1 IBT/Drive NVM List (771, 772)
Chain-
Link Na
me Default Range Description
771-003 ENV CTL ON 0 0-65535 Env. Control On/Off
0= Controls the environ-
ment.
1= Does not control the envi-
ronment (Uses the Environ-
ment Number in ENV NO
SE
T.
)
Other= No environment con-
trol (Determines the Environ-
ment Number based on
t
emperat
ure/humidity data
specified in DBG TMP DAT
and DBG HUM DATA)
771-012 BTR1 HV 32 5-65535 1st BTR Remote output unit:
m
ic
ro ampere (Valid range= 400-
800)
771-013 BTR2 HV 18 10-65535 2nd BTR Remote output unit: -
0.
1kV (Val
id range: 10-75)
771-014 DTS dC HV 30 10-65535 DTS dC Remote output unit: -
0.1kV (Val
id range: 10-45)
771-017 BTR1 REVISE 100 0-65535 1st BTR Remote correction value
Unit:% (Valid range: 0-100)
771-018 BTR2 REVISE 100 0-100 2nd BTR Remote correction value
Unit:% (Valid range: 0-100)
771-019 DTS dC REVISE 100 0-65535 DTS dC Remote correction value
Unit:% (Valid range: 0-100)
771-026 ENV NO 0 - Environment Table No (Storage)
771-037 BTR1 HV REM 0 - 1st BTR HV output (Storage) unit:
m
ic
ro ampere
771-038 BTR2 HV REM 0 - 2nd BTR HV output (Storage)
uni
t: -0.1kV
771-039 DTS dC REM 0 - DTS dC HV output (Storage) unit:
-0.1kV
77
1-042 BTR2 FAILBYPASS 0 0-65535 2nd BTR Contact/Retract Fail
Bypa
ss (Valid range: 0-1)
0: Yes 1: No
771-043 IBTCLN FAILBYPASS 0 0-65535 IBT Cleaner Contact/Retract Fail
By
pa
ss (Valid range: 0-1)
0: Yes 1: No
771-045 BTR2 CAM TIME 500 0-65535 2nd BTR cam - One rotation time
(Unit
: MC)
771-046 IBTCLN CAM TIME 650 0-65535 IBT Cleaner Blade cam - One
rotation time (Unit: MC)
771-051 BTR1 CD1 DUMMY 60 0-65535 1st BTR output correction (Thick
p
aper dumm
y cycle) Unit:% (Valid
range: 0-100)
771-052 BTR1 CD2 DUMMY 30 0-65535 1st BTR output correction (Ultra
t
hick p
aper dummy cycle) Unit:%
(Valid range: 0-100)
771-053 BTR1 OHP DUMMY 30 0-65535 1st BTR output correction (OHP
dum
my c
ycle) Unit:% (Valid
range: 0-100)
771-054 BTR1 BW REVISE 10 0-65535 1st BTR output correction (B/W
m
ode) Unit:
% (Valid range: 0-200)
771-055 BTR1 COL REVISE 100 0-65535 1st BTR output correction (Color
mode) Unit:
% (Valid range: 0-200)
771-056 BTR1 SIMP REVISE 100 0-65535 1st BTR output correction (Sim-
plex mode) Unit:% (Valid range:
0-200
)
771-057 BTR
1 DUP REVISE 100 0-65535 1st BTR output correction (Duplex
mode) Unit:
% (Valid range: 0-200)
771-063 OIL TONER BAND
OFFSET
32 0-655
35 Oil Roll stripe - Toner band write
(Valid range: 1-258)
Unit: mm
771-064 OIL TONER BAND FS 303 0-65535 Oil Roll stripe - Toner band SF
direc
tion (
Valid range: 1-303)
Unit: mm
771-074 DTS MONITOR 0 - Monitor value (Storage)
771-083 BTR1 ON ADJ 0 0-65535 1st BTR HV ON time adjustment
Unit: MC
771-085 BT
R2HV ON ADJ NP 1121 0-65535 2nd BTR HV ON time adjustment
(No
rmal paper/
Second original)
Unit: MC
771-086 BTR2HV OFF ADJ NP 3 0-65535 2nd BTR HV Off time adjustment
(No
rmal paper/
Second original)
Unit: MC
771-087 BTR2HV ON ADJ CD1 1121 0-65535 2nd BTR HV ON time adjustment
(T
hick p
aper) Unit: MC
771-088 BTR2HV OFF ADJ
CD1
3 0-65535 2nd BTR HV Off time adjustment
(Thick p
aper) Unit: MC
771-089 BTR2HV ON ADJ CD2
DSP: BTR 2 HV ON
AD
J S-H
VY
1121 0-65535 2nd BTR HV ON time adjustment
(Ult
ra t
hick paper) Unit: MC
Table 1 IBT/Drive NVM List (771, 772)
Chain-
L
ink Name Default Range Description
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
