Xerox DocuColor 12/DCCS50

1/05
6-149
DocuColor 12/DCCS50
Product Specifications
General Procedures
Reissue
Other Electrical Specifications
1. Leakage protection
• Internal earth leakage breaker
2. Electrical Noise
• VCCI Class 1 compliance
3. Ground
• Class 3
Environmental Specifications
Heat Output
Audible Noise
Ozone Generation
• Maximum 0.02 ppm
Temperature
•50°F (10°C) t
o 95°F (35°C)
Relative Humidity
• 15% TO 85% (Non-condensing)
Altitude
• 0-10,000 ft. (3050M) (Above 2,000 meters requires adjustment by a CSE)
Levelness
• Maximum level difference - 5mm or less (front to back)
• Maximum level difference - 10mm or less (right to left)
System Capability
Warm-up Time
• 100V: 8 minutes 45 seconds or less (20°(C) 68°(F),
60%)
• 110V: 8 minutes 45 seconds or less (20°(C) 6
8°(F), 60%)
• 220V: 8 minutes 30 seconds or less (20°(C) 68°(F),
60%)
Magnification
• 25% to 400% in 1% increments
• 25% through 200%: ±1%
• 201% through 400%: ±1.
5%
Cop
y Speed
First copy out time
• Black/White: 7.9 sec. 8.5×11 (
A4) LEF
• Full Color: 18 sec. 8.5×11 (A
4) LEF
First copy out time with EPC option - Collated mode
• Black/White 10 sec. - 8.5×11 (A
4) LEF
• Full Color: 22 sec. - 8.5×11 (A
4) LEF
Tray 5 or Transparency mode
• 1.8 copies/min.
Continuous copy in copies/min.
Image Loss
• Lead Edge: 3±1mm or
the optional setting of 4mm
• Sides: 3±1mm
• T
rail Edge: 3±1mm
Copy Paper Capability
Paper Trays
Tray 1
• 16 lb. (64 G/m2) through 24 lb. (90 G/m2)
Tray 2, 3, 4
• 16 lb. (64 G/m2) through 32 lb. (134 G/m2)
Tray 5
• 16 lb. (64 G/m2) through 60 lb. (250 G/m2)
Table 3
Model avg. BTU/hr.
(o
pe
rating)
avg. BTU/hr.
(standby)
C/P 4080 2720
LP 3755 1230
Table 4 Audible Noise
Continuous Noise Impulse Noise (db)
Stand by 48.3 -
Copy Cycle 67.1 62.2
Table 5 Copies per Minute
Paper
Size
Copy Mode
B/W 4 Color
11×17 (A3) 25 6.2
8.
5×14 (B4) 28.8 6.
2
8.5×11 (A4) LEF 50 12.5
8.
5×11 (A4) SEF 28.8 6.
2