Xerox DocuColor 12/DCCS50

1/05
2-221
DocuColor 12/DCCS50
15-361 POST IPS PWB Fail (Self Test) RAP, 15-362
Status Indicator RAPs
Reissue
15-361 POST IPS PWB Fail (Self Test) RAP
The POST IPS PWB I/O Port reported an error at power on.
Initial Actions
• Refer to BSD 6.7 in the following procedure.
•
Procedure
PO/PO the copier/printer. If the error code persists, replace the Post IPS PWB (PL 3.5)
15-362 X Hard Fail RAP
Communication Failure between the Pre IPS PWB and the BR PWB.
Initial Actions
• Refer to BSD 6.7 in the following procedure.
• Ensure that P/J560 in
the BR PWB and the Pre IPS PWB are firmly connected.
• Ensure that the connection at the BR PWB has not been tampered with.
• Ensure that the BR PWB mounting screws are tight.
Procedure
Reseat the BR PWB. If the problem continues, replace the following:
•BR PWB (PL 3.5)
•
Pre IPS PWB (PL 3.5)