1/05
8d-115
DocuColor 12/DCCS50
REP 15.3.9, REP 15.3.10
Finisher/Sorter
Reissue
REP 15.3.9 Finisher PWB Cover
Parts List on PL 18.2
Removal
WARNING
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the machine Power Cord.
1. Switch off the printer power and disconnect the AC Power Cord.
2. Roll the Finisher away from the printer until the Finisher stops.
3. Remove the Left Lower Cover (REP 15.3.
6).
4. Remove the Finisher PWB Cover (Figu
re 1).
1. Remove the 12 screws securing the Finisher PWB Cover.
2. Remove the Finisher PWB Cover.
Replacement
1. Replace the Finisher PWB Cover in the reverse order of removal.
Figure 1 Remove the Finisher PWB Cover
REP 15.3.10 Left Upper Cover
Parts List on PL 18.2
Removal
WARNING
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the machine Power Cord.
1. Switch off the printer power and disconnect the AC Power Cord.
2. Remove the Left Upper Cover (Figur
e 1).
1. Remove the two screws securing the cover.
2. Remove the Left Upper Cover.
Replacement
1. Replace the Left Upper Cover in the reverse order of removal.
Figure 1 Remove the Left Upper Cover
To Next Page
Loading...
Need help?
General
