1/05
2-33
DocuColor 12/DCCS50
3-560 Copy Limit Exceed RAP, 3-580 IOT System
Status Indicator RAPs
Reissue
3-560 Copy Limit Exceed RAP
The 3-560 Fault Code indicates that it reached the pre-set copy limit value (specified for/by the
User Password at the Auditron Administrator Mode) during the copying operation.
Initial Actions
Refer to the User Guide in this procedure.
Procedure
PO/PO the machine. Fault Code 3-560 is still declared.
YN
Refer to the User Guide, Using the Auditron Administration Mode, and help the Customer/
Audit
ron A
dministrator to understand how to avoid recurrence of the problem.
Replace the IOT CPU PWB (PL 9.
2).
3-580 IOT System Timing Fail RAP
This Fault Code is declared when the machine was not able to receive the print from/against
the Hint within the specified time.
Initial Actions
• Refer to BSD 3.12 Monitoring in this procedure:
Procedure
PO/PO the machine. Fault Code is still declared.
YN
Inspect the IOT CPU PWB, and the IOT NVM PW
B fo
r loose connections or any obvious
electrical/mechanical cause for malfunction.
Perform the following:
• Replace the IOT NVM PWB (PL 9.2)
• Replace the IOT CPU PWB (PL 9.
2)
To Next Page
Loading...
Need help?
General
