1/05
4-27
DocuColor 12/DCCS50
REP 2.8.2, REP 2.9.1
Repairs and Adjustments
Reissue
Figure 3 Removing the Tray 2 Feed-out Sensor
Installation
1. Reinstall the parts in the reverse order of disassembly.
REP 2.9.1 Tray 5
Parts List on PL 2.9
Removal
NOTE: After replacing Tray 5, clear the HFSI counter [08-810].
WARNING
Turn power off and disconnect the power plug.
1. Remove Tray 5 (Figure 1
).
1. Move Left Middle Cover downward.
2. Pull the hooks (2) outward.
3. Lift Tray 5 and remove it.
Figure 1 Removing Tray 5
Installation
1. Reinstall the parts in the reverse order of disassembly.
To Next Page
Loading...
Need help?
General
