1/05
4-29
DocuColor 12/DCCS50
REP 2.11.2
Repairs and Adjustments
Reissue
REP 2.11.2 Tray 5 Feed Roll
Parts List on PL 2.11
Removal
NOTE: After replacing the Feed Roll, clear the HFSI counter. DC135(008-810) Diag. Screen
NOTE: Replace the Tray 5 Feed, Nudger and Retard Rolls at the same time.
WARNING
Turn power off and disconnect the power plug.
1. Open the Upper Tray 5 Assembly (Figu
re 1).
1. Pull the lever up and open the Upper Tray 5 Assembly.
Figure 1 Opening the Upper Tray 5 Assembly
2. Remove the Tray 5 Feed Roll (Figure 2
).
1. Remove the chute.
2. Remove the collar.
3. Remove the Feed Roll.
Figure 2 Removing the Tray 5 Feed Roll
Installation
1. Reinstall the parts in the reverse order of disassembly.
To Next Page
Loading...
Need help?
General
