To Next Page

To Previous Page

1/05

3-10

DocuColor 12/DCCS50

IQ 3 Geometric RAP, IQ 4 Developer Checkout Proce-

Reissue

Image Quality

Go to the Paper Feeder Checkout Procedure

The problem is with Lead Edge Registration

The problem is with color to color misregistration.

Go to A

DJ 9.1.10, Lead/

Side Edge Adjustment

Go to the Color to Color Misregistration Checkout Procedure.

Registration varies from copy to copy.

Go to ADJ 9.1.10, Lead/

Side Edge Adjustment.

Go to the Registration Checkout Procedure.

The defect occurred on copies from all five paper trays.

Go to the IQ 43 Paper Feed Checkout Procedure.

Go to

the IQ 44 Registration Checkout Procedure.

Go to

the IQ 7 IDFE / Network Checkout Procedure.

IQ 4 Developer Checkout Procedure

Initial Actions

Ensure that the toner supply system is functioning properly and there is sufficient toner of each

color.

Procedure

Go to the IQ 37 Developer Bias HVPS RAP. If the Developer Bias HVPS is good, replace the

developer material for the faulty color. If the problem continues, replace the Developer Housing

for the faulty color.

NOTE: After replacing developer material, go to IQ47 ATC Sensor RAP, Appendix 1. AT

C set-

up procedure

A B

manuals4you.commanuals4you.com

Xerox DocuColor 12/DCCS50 User Manual

Questions and Answers: