EasyManuals Logo
Home>Xerox>All in One Printer>DocuColor 12/DCCS50

Xerox DocuColor 12/DCCS50 User Manual

Xerox DocuColor 12/DCCS50
1617 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #253 background imageLoading...
Page #253 background image
1/05
2-217
DocuColor 12/DCCS50
14-388 XPC ASIC Fail RAP
Status Indicator RAPs
Reissue
14-388 XPC ASIC Fail RAP
The Control Logic detected a ROS Pickup ASIC Failure
Initial Actions
• Refer to BSD 1.1, BSD 6.6 and BSD 6.7 in the following procedure:
• Ensure that P/J398 on t
he Halftone PWB and the P/J345 and P/J341 on the LDD PWB
are fully seated.
•Go to Flag
2 and Flag 3 on BSD 6.5 and check the wires for an open or shorted circuit.
Procedure
PO/PO the machine. If the fault continues, go to 14-376 Half Tone PWB Fail RAP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox DocuColor 12/DCCS50 and is the answer not in the manual?

Xerox DocuColor 12/DCCS50 Specifications

General IconGeneral
BrandXerox
ModelDocuColor 12/DCCS50
CategoryAll in One Printer
LanguageEnglish

Related product manuals