1/05
10-190
DocuColor 12/DCCS50
IDFE Enclosure, Network Interface
Reissue
Principles of Operation
IDFE Enclosure
The IDFE Enclosure is formed from a single piece of 22 gauge galvanized steel to provide EMI
and EME suppression for the noise sensitive components in the IDFE and the IOT. A Cover
Plate is added for the CD-ROM Drive to help suppress additional EME emissions from the CD-
ROM Drive. The IDFE uses an internal Fan to provide air flow through the IDFE in a right to left
direction. The Internal Fan is powered by +12 VDC from the Printer LVPS. The fully assembled
IDFE weighs 13.5 lbs. (6.1 kg).
Network Interface
The IDFE can interface
with local area networks by use of seve
ral different protocols:
•TCP/IP
• Netware IPX (NDS and Bindery only)
• AppleTalk
• LPD network protocol stack
• Banyan VINES (requires additional hardware through an
exte
rnal print server using a par-
allel port or controller)
• NetBEUI
• Netbios
The IDFE supports the following physical interfaces:
• Parallel printer interface (For external print se
rver to support Banyan VINES)
• Ethernet (10 or 100 Mbps)
• Token Ring (4 or 16 Mbps)
NOTE: Installation of the Token Ring PWBA requires optional hardware.
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
