1/05
4-143
DocuColor 12/DCCS50
REP 9.3.1
Repairs and Adjustments
Reissue
REP 9.3.1 Power Chassis
Parts List on PL 9.3
Removal
WARNING
Turn power off and disconnect the power plug.
1. Remove the following covers.
a. Tray Module Rear Cover (PL 1
1.3)
b. Filter Unit Cover (PL 11.2)
c.
Power Chassis Cover (PL 11
.2)
2. Remove the duct (Figu
re 1).
1. Remove the screws (2).
2. Release the hook and remove the duct.
Figure 1 Remove the Duct
3. Remove the Suction Blower (Figu
re 2).
1. Disconnect the connector.
2. Remove the screws (2).
3. Remove the Suction Blower.
Figure 2 Remove the Suction Blower
4. Remove the screws (large: 1/small:3) of the AC Drive PWB. Keep the AC Drive PWB con-
nector connected (Figur
e 3).
1. Remove the screw (large: 1).
2. Remove the screws (small: 2).
To Next Page
Loading...
Need help?
General
