1/05
4-142
DocuColor 12/DCCS50
REP 9.2.3
Reissue
Repairs and Adjustments
Figure 3 Disconnect the Connectors
5. Remove the Half Tone PWB (Figu
re 4).
1. Remove the screws (12).
2. Remove the screws (2) and washers (2).
3. Remove the Half-Tone PWB.
Figure 4 Remove the Half Tone PWB
Installation
1. Reinstall the parts in the reverse order of disassembly.
CAUTION
Failure to comply with the board replacement procedur
e in GP 10 Replacing Billing PWBs
, could result in catastrophic NVM corruption.
2. Refer to GP 10 Replacing B
illing PWBs in order to synchronize the serial number of the
PWB.
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
