1/05
10-3
DocuColor 12/DCCS50
Product Configurations
Principles of Operation
Reissue
Introduction
This machine is a multipurpose device:
• It is available as a Printer (Figu
re 1) Copier or Copier/Printer/Scanner (Figure 2 and Fig-
ure 3)
• It can operate in black and white monochrome and 4-color modes
• It can produce 50 copies per minute monochrome or 12.
5 copies per minute color
This chapter introduces the following areas:
• Product Configurations
• Principles of Operation Overview
• Standby Power
• Local User In
t
erface
• Remote User Interface
• Machine Run Control
• Start Power
• Document
T
ransportation
• Imaging
• Paper Supply
• Duplex Automat
ic Document Feeder
• Paper Transportation
• Xerographics
• Fuser Assembly
• Mailbox/S
or
ter and Offset Copy Tray
• Digital Front End (Integrated/External)
Product Configurations
The machine is available in the following configurations:
• As a color and monochrome Printer connected to a local area network
• As a stand-alone color and monochrome Copier
• As a combined color and monochrome Printer, document Scanner and Copier, also con-
nected to a local area network
This machine is available with the following optional accessories:
• High Capacity Paper Feeder (HCF) for input paper
•Edit Pad
• Billing accessories for the Foreign Interface
• Mailbox/Sorter for output material
• 500 Sheet Offset Catch Tray (OCT)
• Envelope Tray
• Intergrated or external Digital Front End (DFE)
• Stapler
To Next Page
Loading...
