1/05
6-39
DocuColor 12/DCCS50
dC131 DADF NVM List (710)
General Procedures
Reissue
dC131 DADF NVM List (710)
Table 1 DADF NVM List (710)
Chain-
Link Name Defau
lt Range Description
710-001 DADF Fail Bypass 0 0-1 Fault bypass= 1, No Fault
by
pa
ss= 0 (Used in DADF)
710-002 DADF Jam bypass 0 0-1 Jam bypass= 1, No Jam bypass=
0 (Us
ed in DADF)
710-004 Document Lead Registra-
tion Timer value in the
D
ADF
Simplex Mode
59 1-255 Adjustment value for document
regist
rati
on (number of pulses
from Registration Sensor OFF to
Belt Motor Slow Down) (Used in
DADF)
710-005 DADF Feed Motor OFF
ad
ju
stment value
10 4-16 Time period from Registration
SNR ON to Feed Motor OFF
(5ms step, Default= 50ms) (Used
in DADF)
710-006 DADF B4 document size
th
re
shold
373 360-460 Threshold to determine the B4S
or 11 X 17S in the RX mode.
(Used in DADF)
710-007 Document Lead Registra-
tion Timer value in the
D
ADF
Duplex Mode (S: 8.5
X 11LEF or smaller)
59 0-100 Number of pulses from Registra-
tion Sensor OFF to Belt Motor
S
low Down
710-008 Document Lead Registra-
tion Timer value in the
D
ADF
Duplex Mode (M:
A4SEF or smaller)
60 0-100 Number of pulses from Registra-
tion Sensor OFF to Belt Motor
S
low Down
710-009 Document Lead Registra-
tion Timer value in the
D
ADF
Duplex Mode (L: 8.5
X 13LEF or larger)
61 0-100 Number of pulses from Registra-
tion Sensor OFF to Belt Motor
S
low Down
710-010 Belt Motor Stop Timer value
in DA
DF Duplex
Mode
(Loop in reverse) (S: 8.5 X
11LEF or smaller)
280 200-400 Time period from Duplex Sensor
O
N to Belt Motor OFF (Number of
pulses until Belt Motor Slow
Down)
710-011 Belt Motor Stop Timer value
in DA
DF Duplex
Mode
(Loop in reverse) (M:
A4SEF or smaller)
285 200-400 Time period from Duplex Sensor
O
N to Belt Motor OFF (Number of
pulses until Belt Motor Slow
Down)
710-012 Belt Motor Stop Timer value
in DA
DF Duplex
Mode
(Loop in reverse) (L: 8.5 X
13LEF or larger)
290 200-400 Time period from Duplex Sensor
O
N to Belt Motor OFF (Number of
pulses until Belt Motor Slow
Down)
710-043 Total Feed Count 0 0-65535 Write protected: Number of total
DA
DF F
eeds
710-044 Feed Count 0 0-65535 Write protected: Accumulated
value of DADF Feeds after reset
Table 1 DADF NVM List (710)
Chain-
Lin
k Name Default Range Description