1/05
8c-9
DocuColor 12/DCCS50
Wiring Connector List
Edit Pad
Reissue
Wiring Connector List
How to use the Wiring Connector List
1. To find the location of a connector, refer to the Figure and Item Number of the Plug/Jack
Location Drawings section, by referring to Figure and Item Number of the Wiring Con-
nector List.
2. The Plug/Jack and P/J in the Index are identified by following method:
a. J250 represents Jack 250.
b. P250 represents Plug 250
c. Numerals without P or J represent both Jack and Plug
Refer to Figure 1 for an explanation of each column heading in the Plug/Jack Index.
Fi
gure 1 Plug/Jack Index connector list example
P/J No.
Figure No.
Item No.
P/J Number or
Designator
Figure number of the Illustra-
tion showing the area of the
Finisher where the Plug/Jack
can be located.
Item number in the
Illustration that shows
the specific location of
a Plug/Jack.