1/05
4-81
DocuColor 12/DCCS50
REP 6.1.3
Repairs and Adjustments
Reissue
Figure 4 Lock the Rotary Latch Lever
4. Install the Rotary Latch Lever (Figu
re 5).
1. Push the Rotary Latch Lever in the direction of the arrow.
2. Fasten the screws (2).
Figure 5 Install the Rotary Latch Lever
5. Remove the Locating Pin and return it to its storage position.
6. After installation, check the gear play. Manually loc
k and
release the solenoid. Make sure
that the solenoid is properly locked.
CAUTION
Ensure that the Locating Pin is removed before attempting to run the machine.
To Next Page
Loading...
Need help?
General
