Xerox DocuColor 12/DCCS50

1/05
4-126
DocuColor 12/DCCS50
REP 8.3.4
Reissue
Repairs and Adjustments
5. Disconnect the connector (Figure 2).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
Figure 2 Disconnect the Connector (Rear of Fuser)
6. Remove the Pressure Roll Heater Rod (Figu
re 3).
1. Remove the Pressure Roll Heater Rod.
Figure 3 Remove the Pressure Roll Heater Rod
Installation
1. Reinstall the parts in the reverse order of disassembly.
manuals4you.commanuals4you.com