1/05
9-46
DocuColor 12/DCCS50
Reissue
Installation Instructions
Figure 8 Connecting the Scan cable
6. Connect the Print Cable (Figur
e 9):
Figure 9 Connecting the Print Cable
DC 12 / DCCS 50 Machine Checkout
1. For DC 12 with attached Splash DFE:
Reconnect the DocuColor 12 interface Cables (left si
de print and right side scan) to the
IOT. Switch On the Server power.
2. For DC 12 with attached Fiery DFE:
Reconnect the Copier Interface Cables (left si
de print and right side scan) to the inter-
face ports on the copier. Switch On the Server power.
3. For DCCS 50:
Reconnect the DDI Cables to the IOT.
4. Dock the Finisher.
5. Reconnect the machine power cord; switch On the power.
6. For DC 12 / DCCS 50 machines with a finisher installed:
From the User Interface, Touch the Job Assemb
ly tab. Ensure Additional Originals and
Output Delivery buttons are displayed. Place 5 colored pages on the DADF, from the
Basic Copying tab select Stapling & More...., select Collated (Staple Options), select
the desired stapling option. Touch Save to return to the Copy Output screen. Touch Save
again to return to the Basic Copying tab, Place 5 colored pages on the DADF, select 3
copies and press Start.
7. For DC 12 / DCCS 50 machines without a finisher installed:
From the User Interface, Touch the Jo
b Assemb
ly tab. Ensure Additional Originals and
Output Delivery buttons are displayed. Place 5 colored pages on the DADF, from the
Basic Copying tab select the Auto Output collated feature, select 3 copies and press
Start.
1
Connect the Scan
Cable
2
Install the P-Clamp (6N)
3
Secure the P-Clamp
(1) M3 screw
1
Connect the Print
Cable
2
Install the P-Clamp
(7N)
3
Secure the P-Clamp
(1) M3 screw
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
