Xerox DocuColor 12/DCCS50 User Manual

1/05
4-91
DocuColor 12/DCCS50
REP 6.6.2
Repairs and Adjustments
Reissue
Figure 3 Add the Developer
6. Make sure that the Development Housing hook is not up on the Upper Cover (Figure
4).
Figure 4 Position the Hook
7. Restore the machine.
8. Make 10 copies of the Test Pattern (82E10810) to mix the Developer in the following
mode:
a. 1
1” x 17” or A3 and 4-color mode (full color)
b. 10 sheets
9. Perform the MAX Set Up (ADJ 9.1.
1).
NOTE: After performing MA Set Up, go to IQ47 ATC Sensor RAP, Appendix 1. A
TC set-up pro-
cedure.

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English