1/05
6-78
DocuColor 12/DCCS50
dC131PH NVM List (761)
Reissue
General Procedures
761-343 3ARRIVE AT
DUPLEX OUT
SENSOR 3
DSP: ARRV DUP
ou
t S
NR 3
0 None Measurement result (Last 10): Duplex Out
S
en
sor ON timing from Duplex Path Sen-
sor ON.
Default=0ms
Range=None
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-344 ARRIVE AT
DUPL
EX OUT
SENSOR 4
0 None Measurement result (Last 10): Duplex Out
S
ensor ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-345 ARRIVE AT
DU
PL
EX OUT
SENSOR 5
0 None Measurement result (Last 10): Duplex Out
S
ensor ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-346 ARRIVE AT
DU
PL
EX OUT
SENSOR 6
0 None Measurement result (Last 10): Duplex Out
S
ensor ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-347 ARRIVE AT
DU
PL
EX OUT
SENSOR 7
0 None Measurement result (Last 10): Duplex Out
S
ensor ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
Table 1 PH NVM List (761)
Chain-
Lin
k Name Default Range Description
761-348 ARRIVE AT
DUPLEX OUT
SENSOR 8
0 None Measurement result (Last 10): Duplex Out
Sens
or ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-349 ARRIVE AT
DUP
LEX
OUT
SENSOR 9
0 None Measurement result (Last 10): Duplex Out
Sens
or ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-350 ARRIVE AT
D
UPLE
X OUTSEN-
SOR 10
0 None Measurement result (Last 10): Duplex Out
Sens
or ON timing from Duplex Path Sen-
sor ON.
Theoretical value=808ms
Unit=10ms/step
Default DATA=0 (10ms RTMR)
Last storage location - see 761-375.
761-351 ARRIVE AT TRAY 1
P
RE FE
ED SEN-
SOR INDICATE
PO
INT
0 0-9 Show
s the location of the latest timings
(761-101-110) (#1 P
re-Feed Sensor
arrival timings 1-10)
e.g.; If the value is 5, the latest data is
sav
ed in 5,
the previous data is saved in
4, and the data prior to the previous data
is saved in 3.
761-352 ARRIVE AT TRAY 2
P
RE FE
ED SEN-
SOR INDICATE
PO
INT
0 0-9 Show
s the location of the latest timings
(761-111-120) (#2
Pre-Feed Sensor
arrival timings 1-10)
e.g.;: If the value is 5, the latest data is
sav
ed in 5,
the previous data is saved in
4, and the data prior to the previous data
is saved in 3.
761-353 ARRIVE AT TRAY 3
P
RE FE
ED SEN-
SOR INDICATE
PO
INT
0 0-9 Show
s the location of the latest timings
(761-121-130) (#3 Pr
e-Feed Sensor
arrive timings 1-10)
e.g.; If the value is 5, the latest data is
sav
ed in 5,
the previous data is saved in
4, and the data prior to the previous data
is saved in 3.
Table 1 PH NVM List (761)
Ch
ain-
Lin
k Name Default Range Description
manuals4you.commanuals4you.com
To Next Page
Loading...
