Xerox DocuColor 12/DCCS50 User Manual

1/05
6-52
DocuColor 12/DCCS50
dC131PH NVM List (761)
Reissue
General Procedures
761-067 ADJUST DUPLEX
OUT MOTOR OFF
TIMING(FROM
DUPLEX OUT
SENSOR ON)
16 0-85 Time from Duplex Out Sensor ON to
Duplex O
ut Motor OFF (Duplex Wait Point
stop position - Adjustment)
Default=32ms
Range=0-170ms (±4
0ms)
(0-85)
Unit=2ms/step
Default DATA=16 (Quadrant MC
CLK)
761-068 AD
JUST DUPLEX
OUT MOT
OR ON
START TIM-
ING(FROM
DU
PL
EX TRAY)
246 221-271 Duplex Out Motor ON start time to send
paper fr
om the Duplex Tray (Duplex Feed
start timing)
Default=492 ms
Range=442-542ms (±50ms)
(221-
271)
Unit
=2ms/step
Default DATA=246 (Quadrant MC
CLK)
761-069 SP
AREINVERT
MOTO
R ON TIM-
ING(DUPLEX
M
ODE
: PITCH
1500ms ONLY)
383 380-386 Time from Registration Motor ON using
Pit
ch
1500ms Single Leaf Duplex(*4) to
Invert Motor ON (Duplex inversion start
timing)
Default=3830ms
Range=3800-3860ms (±30ms
) (3
80-
386)
Unit=10ms/step
Default DATA=383 (10ms RTMR)
(*4)40 PPM MODE
761-090 TAKE AWAY 3
CLUT
CH ON TIM-
ING(USED TRAY 4)
15 10-20 Time from #4 Take Away Feed Clutch ON
t
o #3 Take Away Feed Clutch ON
Default=150ms
Range=100-200ms (10-20)
Unit=10ms/step
Default DATA=15 (10ms RTMR)
761-091 TAKE AWAY 2
CLUT
CH ON TIM-
ING(USED TRAY 4)
20 15-25 Time from #3 Take Away Feed Clutch ON
t
o #2 Take Away Feed Clutch ON (Feed
from #4 Tray)
Default=200ms
Range=150-250ms (15-25)
Unit=10ms/step
Default DATA=20 (10ms RTMR)
Table 1 PH NVM List (761)
Ch
ain-
Lin
k Name Default Range Description
761-092 TAKE AWAY 2
CLUTCH ON TIM-
ING(USED TRAY 3)
15 10-20 Time from #3 Take Away Feed Clutch ON
t
o #2 Take Away Feed Clutch ON (Feed
from #3 Tray)
Default=150ms
Range=100-200ms (10-20)
Unit=10ms/step
Default DATA=15 (10ms RTMR)
761-095 ADJUST REGI
LO
OP
(From Tray 5
Postcard)
58 33-83 Time from Registration SNR ON to Main
Mot
or 2 OFF (Registration Loop adjust-
ment - Tray 5: Postcard)
Default=116ms
Range=±50ms
(±25)
Unit=2m
s/step
Default DATA=58 (2ms RTMR)
761-101 ARRIVE AT TRAY 1
PRE FE
ED SEN-
SOR 1(USED
TR
AY
1)
0 None Measurement result: Timing from #1 Tray
Pre-Fe
ed start to #1 Pre-Feed SENSOR
ON
Theoretical value=115ms
JAM TIMER=408ms (50PPM,
12.
5PPM B
side) = 458ms (Other)
Unit=0.5ms/step (Normal paper)
Last storage location - see 761-351.
761-102 ARRIVE AT TRAY 1
PRE FE
ED SEN-
SOR 2(USED
TR
AY
1)
0 None Measurement result: Timing from #1 Tray
Pre-Fe
ed start to #1 Pre-Feed SENSOR
ON
Theoretical value=115ms
JAM TIMER=408ms (50PPM,
12.
5PPM B
side) = 458ms (Other)
Unit=0.5ms/step (Normal paper)
Last storage location - see 761-351.
761-103 ARRIVE AT TRAY 1
PRE FE
ED SEN-
SOR 3(USED
TR
AY
1)
0 None Measurement result: Timing from #1 Tray
Pre-Fe
ed start to #1 Pre-Feed SENSOR
ON
Theoretical value=115ms
JAM TIMER=408ms (50PPM,
12.
5PPM B
side) = 458ms (Other)
Unit=0.5ms/step (Normal paper)
Last storage location - see 761-351.
Table 1 PH NVM List (761)
Chain-
Lin
k Name Default Range Description
manuals4you.commanuals4you.com

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English