Xerox DocuColor 12/DCCS50 User Manual

1/05
6-112
DocuColor 12/DCCS50
dC330 Component Control
Reissue
General Procedures
011-086 BIN 5 GATE SOLE-
NOID
Output Switch the 5 Bin Gate to the 5 Bin
Tray direction.
Cannot run with the 2 to 4, 6 to 10
B
in G
ate Solenoids (011-083
through 011-085, 011-087 through
011-091).
Sorter
011-087 BIN 6 GATE SOLE-
NOID
Output Switch the 6 Bin Gate to the 6 Bin
T
ray d
irection.
Cannot run with the 2 to 5, 7 to 10
B
in G
ate Solenoids (011-083
through 011-086, 011-088 through
011-091).
Sorter
011-088 BIN 7 GATE SOLE-
NOID
Output Switch the 7 Bin Gate to the 7 Bin
T
ray d
irection.
Cannot run with the 2 to 6, 8 to 10
B
in G
ate Solenoids (011-083
through 011-087, 011-089 through
011-091).
Sorter
011-089 BIN 8 GATE SOLE-
NOID
Output Switch the 8 Bin Gate to the 8 Bin
T
ray d
irection.
Cannot run with the 2 to 7, 9, 10 Bin
G
at
e Solenoids (011-083 through
011-088, 011-090, 011-091).
Sorter
011-090 BIN 9 GATE SOLE-
NOID
Output Switch the 9 Bin Gate to the 9 Bin
T
ray d
irection.
Cannot run with the 2 to 8,10 Bin
G
at
e Solenoids (011-083 through
011-089, 011-091).
Sorter
011-091 BIN 10 GATE SOLE-
NOID
Output Switch the 10 Bin Gate to the 10
B
in T
ray direction.
Cannot run with the 2 to 4, 6 to 10
B
in G
ate Solenoids (011-083
through 011-085, 011-087 through
011-091).
Sorter
011-093 OCT OFFSET MOTOR
FR
ONT
Ou
tput Moves the OCT to the front direc-
tion and stops at the OCT Offset
Posit
ion.
(CW) Moves the OCT to the front
direc
tion a
nd stops 20 msec after
the OCT Offset Position Sensor
detects it.
Sorter
Table 2 Output Component Control Codes
ID
Des
cription In_Out Smart Help
Module_I
D
011-095 OCT OFFSET MOTOR
BACK
Output Moves the OCT to the rear direction
and stops at the OCT Offset Posi-
tion.
(CCW) Moves the OCT to the front
Direc
ti
on and stops 20 msec after
the OCT Offset Position Sensor
detects it.
Cannot run with Offset Position
S
ensor ON
.
Cannot run with OCT Offset Motor
F
ront
.
Sorter
012-005 MBX DRIVE MOTOR Output Low: On
Drives MBX Drive Motor
Finisher
012-010 DEC MOTOR ON/OFF
60
Output Low: On
Drives DEC Paper Transport Roll at
60m
m/s (act
ually 130mm/s)
Finisher
012-011 DEC MOTOR ON/OFF
130
Output Low: On
Drives DEC Paper Transport Roll at
130m
m/s.
F
inisher
012-012 DEC MOTOR ON/OFF
220
Output Low: On
Drives DEC Paper Transport Roll at
220m
m/s.
F
inisher
012-013 DEC MOTOR ON/OFF
350
Output Low: On
Drives DEC Paper Transport Roll at
130m
m/s.
F
inisher
012-020 FINSHER TRANS-
PORT MOTOR
Output Low: On
Drives Finisher Transport Motor.
Finisher
012-024 EJECT MOTOR FOR-
WARD
Output Not measurable
Drives Eject Roll forward.
Note: Not measurable in field due to
24V
Clock
.
Finisher
012-025 EJECT MOTOR
RE
VE
RSE
Output Not measurable
Drives Eject Roll backward.
Note: Not measurable in field due to
24V
Clock
.
Finisher
012-026 EJECT CLAMP AND
OFFS
ET MOTOR UP/
DOWN
Output High: On
Drives Eject Roll up/down. (500ms)
Finisher
012-027 EJECT CLAMP AND
OF
FS
ET MOTOR F/R
Output High: On
Drives Eject Roll to front/rear.
(500ms)
Fi
nisher
Table 2 Output Component Control Codes
I
D Descri
ption In_Out Smart Help
Module_I
D
manuals4you.commanuals4you.com

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English