iNFiNiT! Family Operation Manual
Revision D 3-45 Start-Up
reflect the local Windows environment, whether it be
French, German, Spanish, etc. The iNFiNiT! Family
menu functions can be accessed using local key posi-
tions.
See Section 9 of the WiNFiNiT! Option Handbook (Pub.
No. 2A02024) for information on Placement Tables, and
Section 11 of the same handbook for information on cus-
tom keymaps.
+:+DUGZDUH'LDJ6(783+
In versions before 9.00, diagnostics tests were automati-
cally performed on bootup These tests have been
removed, considerably shortening bootup time. If neces-
sary, hardware diagnostics can be performed at any time
via the
HW Diag function found on the third page of the
Program Loader Setup menu:
• From the Program Loader menu, press
SET-UP H.
OR...
[ ] 1. Press
SET-UP.
[ ] 2. Press
P P or select Next Page twice.
[ ] 3. Press
H or select HW Diag. The system
performs the diagnostics. When finished, the
system is ready to use.
5$0 5HVHW0 RGH 6(78 3 (5$ 6(
All iNFiNiT! family systems have certain critical setup
information (system configuration, RAM allocation,
etc.) stored in battery-backed RAM on the CPU board.
During certain operations (operating system installations,
upgrades, etc.), it is necessary to reset this memory.
However, if the installation procedure is not performed
correctly, an invalid system configuration might be writ-
ten to this memory.
To Next Page
Loading...