Chyron infinit! series - 10.4.1.3 More on Creating Subpalettes; 10.4.2 Exiting the Subpalette; 10.4.3 Recording;Reading Subpalettes

CHYRON Corporation
Colors & Palettes 10-18 Revision D
 0RUHRQ&UHDWLQJ6XESDOHWWHV
A Subpalette can contain both gradations and individual
colors. You can also create a gradation, then change indi-
vidual colors within that gradation or add a gradation
within the first gradation.
Several gradations can be placed end-to-end in a single
Subpalette to create interesting effects.
• After finishing one gradation, make the end point of
the first gradation the start point for the next. Pick a
new end point, then gradate again. The result is a
smooth gradation from color to color.
 ([LWLQJWKH6XESDOHWWH
• To exit from Subpalette and return to Palette mode,
press
P or select Palette.
• To exit and return to Message Compose, press
Q,
CNTL or select Quit.
• To exit without saving changes, press
ESC.
 5HFRUGLQJ5HDGLQJ6XESDOHWWHV
To record an individual Subpalette:
• While in the Subpalette menu, press
CLR, then
enter an unoccupied ID number. Press
RCD or
select
Record.
To read back a Subpalette:
•
From the Message Compose main menu or Pal-
ette menu:
Press CLR, then enter the message ID
number. Press
READ. The Subpalette information is
written to the Color Key position (for example,
RED)
from which it was recorded.