Chyron infinit! series - 20.6.2 CCIR-601 Digital VIM Configuration; 20.6.2.1 601 Video Input Configuration: iNFiNiT!; 20.6.2.2 601 Video Input Configuration: MAX!>

CHYRON Corporation
Video Input Option 20-18 Revision D
•The Delay slider adjusts the delay between VIM
input and writing to the frame buffer in one pixel
increments.
NOTES
In iNFiNiT’s Dual User mode, the Gain
and Black and Delay functions cannot
be altered by both users
simultaneously.
When configuring the iNFiNiT’s
Analog Video Input Module, be sure
to check the Delay setting if the video
image is offset from center.
For iNFiNiT!, MAX!> and MAXINE!, the
VIM is calibrated for GAIN = 40 and
Black = 25. Always set BLACK before
setting GAIN.
 &&,5 'LJLWDO9,0
&RQ ILJX UDWLRQ
 9LGHR,QSXW
&RQILJXU DWLRQL 1) L1 L7
Adjustments to the iNFiNiT!’s 601 Video Input Module
are made on the board itself; refer to §2.7.2. Gain and
Black levels are not variable in the iNFiNiT!’s CCIR-
601.
 9LGHR,QSXW
&RQILJXUDWLRQ0$;!
The Video Input Configuration menu for MAX!>601
contains two adjustment functions: