iNFiNiT! Family Operation Manual
Revision D 15-21 Advanced Read FX
NOTE
In a sequence of messages using
Transition Patterns F, G, or H, if font
size in one message is different from
font size in another message,
transitions that have rows
independently set may produce
unexpected results. It is good
practice to preview a Read Effect
before putting it on air.
5HDG(IIHFWVDQG
2XWRI6HTXHQFH0HVVDJHV
When using Read Effects, you may want to execute
READ NEXT using out-of-sequence messages. To load,
then display an out-of sequence message:
[ ] 1. Press
CLR, then enter the ID number of the
message that you want loaded into the Read
Next buffer. Press
READ NEXT.
The message is loaded into the Read Next
buffer.
Read next buffer ready is displayed
on the Prompt Line.
[ ] 2. Press
READ NEXT. The message assigned the
next ascending ID number is loaded into the
Read Next buffer.
Read next buffer ready is
displayed on the Prompt Line.
• If you press
READ NEXT again at this
point, the message loaded into the Read
Next buffer is displayed.
• If, however, you want to display another
out-of-sequence message, the above proce-
dure must be repeated.
[ ] 3. Repeat this operation as many times as
necessary.
To Next Page
Loading...