Chyron infinit! series - 7.8.8 Overlapping Text; 7.9 Inter-Character Spacing (Kerning) Inter-Row Spacing (Leading); 7.9.1 Squeeze or Expand Spacing on Both Sides of a Character

iNFiNiT! Family Operation Manual
Revision D 7-41 Formatting & Editing
 2YHUODSSLQJ7H[W
• If you shift text to overlap characters, the most
recently typed character is treated as the top charac-
ter.
• If you shift text to overlap rows, the row with the
highest row number (usually the last-typed row) will
be on top.
• If the text in the two swapped rows is overlapped, the
overlap priority is also swapped.
 ,QWHU&KDUDFWHU6SDFLQJ.HUQLQJ
,QWHU5RZ6SDFLQJ/HDGLQJ
The blank space between characters or rows can be
increased or decreased to fine tune a display. Squeeze
and Expand can bring characters or rows closer or push
them further apart.
Kerning refers to the space adjustment between charac-
ters. Inter-Row Spacing refers to the space adjustment
between rows.
Super Shift can be used with Squeeze or Expand
to make
text moves in larger increments (§7.8.6).
 6TXHH]HRU([SDQG6SDFLQJRQ
%RWK6LGHVRID&KDUDFWHU
[ ] 1. Place the cursor on the selected character.
[ ] 2. Press
CNTL.
[ ] 3. Press and hold the
SHIFT CHAR key, then
press Ì or Í to move characters towards or
away from the character the cursor is on.