Chyron infinit! series - 23.4 CMF;JPEG Operation; 23.4.1 Total Motion Control Panel Menu

CHYRON Corporation
Total Motion Control 23-10 Revision D
• An external SCSI Express drive chassis must be
powered up before the system chassis. This enables
the correct communications protocol to be estab-
lished between the units. If the SCSI Express chassis
is off when the system is powered on, a message will
be posted in the Program Loader.
• Defragment for CMFs and JPEG files is not yet
implemented. The SCSI Express drive can be
defragmented, but the CMFs and JPEG files are not
affected.
 &0)-3(*2SHUDWLRQ
 7RWDO0RWLRQ&RQWURO3DQHO0HQX
The Total Motion Control Panel menu (Figure 23-4)
accesses all Total Motion Control functions. To open this
menu:
• From the Message Compose main menu, press
CNTL
V
. The Total Motion Control Panel menu is dis-
played.
NOTE
Previously, pressing CNTL V toggled
between a filled cursor to an open
cursor on the Edit Monitor in Message
Compose. Now to change cursor
style, press CNTL ALT V.