CHYRON Corporation
Buffers & Channels 14-16 Revision D
Figure 14-4. Reboot Prompt
[ ] 5. Press any alphanumeric key or click outside
the window to close the prompt and return to
the Program Loader Setup menu.
[ ] 6. Press
B or Reboot. The system reboots, and
the new setting takes effect.
0$;!3UHYLHZ
0HVVDJH&RPSRVH
3UHYLHZ2XWSXW)XQFWLRQV
Both AIR and Preview can be the destination for Read
operations, or the source for Record operations.
Once Preview is enabled as described above,
CNTL
XFER
no longer swaps the contents of the B CHANNEL
with the PREVIEW CHANNEL. Instead,
CNTL ALT
XFER
swaps the contents of the AIR and Background
buffer of the EEFB that is equipped with the Preview
Output hardware. The frame buffer must be active when
CNTL ALT XFER is executed.
CNTL ALT XFER executes as follows:
• The RGB data in PREVIEW is transferred to AIR
first.
• The RGB data in AIR is transferred to PREVIEW
second.
The Output Percentage level of the MAX!> Preview Out-
put is always 100%.
To Next Page
Loading...