CHYRON Corporation
Flash Font 13-40 Revision D
CHAR mode is the default setting for this item.
5RWDWH
This feature applies 2-D rotation to a character, word, or row.
• Press
SHIFT CHAR + Î; or click Î on the field to
rotate the object counterclockwise. Rotating an
object counterclockwise displays negative angular
values to 179°.
• Press
SHIFT CHAR + Ï or click Ï on the field to
rotate the object clockwise. Rotating an object
clockwise displays positive angular values to 180°.
6KDUS
Sharp sets the amount of post-conversion filtering
applied to the object’s edges. The higher the
Sharp value,
the softer the edge after conversion (i.e. transition
between character and background will be softer). Use
one of the methods described in §13.3 to enter a value
from
0 to 7. 1 is the default setting.
)XQFWL RQ,FRQV
The function icons in the Advanced Effects menu include
the following:
Convert (CNVRT)
Converts the current selection on screen.
Cnvrt Font (C)
Converts entire font in foreground or background
mode.
3D (T)
Opens a three-dimensional conversion window
(described in §13.15).
Drive (D)
Selects the Master Font drive.
To Next Page