iNFiNiT! Family Operation Manual
Revision D 13-55 Flash Font
7H[WXUH
:LUHIU DPH 0 RGHO
Entries in the Object area of the 3D Utility window are
reflected immediately in the appearance of the wire-
frame. The
Rotate function is reflected by the position of
the yellow or green pyramid; effects from other Light
functions (
Specular, Ambient, and Intensity) do not
appear until after conversion.
The effects of adjusting fields in the Object area are
shown in the following diagram (Figure 13-30).
Type:
Message:/Func:
[ ] 1. Highlight, then press the SPACE BAR to
toggle through
NONE, RGB, and FUNC to
define the type of texture file (if any),
which will be used in the conversion.
[ ] 2. Select either
Message: if the Type: field is
set to
RGB or NONE; or Function: if the
Type: field specifies FUNC.
Drive:
Dir:
These two fields specify where the Texture file is
located. It does not have to be stored on the same
device as the current message or font directory.
To Next Page
Loading...