Chyron infinit! series - 13.9 TrueType and Bitstream Characters; 13.9.1 TrueType; 13.9.1.1 Accessing a TrueType Font; 13.9.1.2 TrueType Codes

CHYRON Corporation
Flash Font 13-30 Revision D
To exit Flash Font Typing mode:
• Press a Font Key. That font now becomes active.
To reaccess Flash Font Typing Mode:
• Press
CNTL CNVRT. You can then cycle through the
Flash Fonts as described above. Note that the
Font:
field on the keyboard LCD specifies
Font 17. Font
17 includes all of the Flash Fonts. See §13.9 for more
details.
 7 UXH7\SHDQG%LWVWUHD P&KDUDFWHUV
 7UXH7\SH
  $FFHVVLQJD 7 UXH7\SH)RQW
An entire TrueType font is accessible in one of the
following ways:
• It must have been imported and converted into a
Master Font via the Flash Font TrueType function.
The WiNFiNiT! option is necessary for importing
True Type fonts. See Section 9.4 of the WiNFiNiT!
Option Handbook (Pub. No. 2024) for information
on font import.
• A Master Font created from a TrueType font via the
Super MakeMaster software option, then networked
to (and stored on) the system.
• A recorded message using a Flash Font created from
a TrueType Master font is available to the system.
 7UXH7\SH&RGHV
If a PC is available, display the Character Map of the
TrueType font.
[ ] 1. From Windows the Character Map, found in
the Accessories, display a Character Map for