iNFiNiT! Family Operation Manual
Revision D 1-11 Welcome!
0 DLQ&KDVVLV%DVLF&RQILJXUDWLRQ
The main chassis for each system contains the following:
L1)L1L7
• 68040- or 68060-based CPU board
• One CPU Transition board
• VME/VSB backplane with 4:4:4:4 processing
• Two 32 bit Frame Buffer boards (expandable to three)
• One Sync Generator board
• Dual Encoder board w/RGB standard
• One Mix and FX board
• One Transcoder board
• Eight (9U), four (6U) expansion slots
• 8 MB of system memory, expandable to 256 MB
• High capacity hard disk drive w/ one ext. SCSI port
• Optional Zip high-capacity cartridge drive
• Four serial ports configurable for RS-232 or RS-422
• Parallel port
• GPI (General Purpose Interface) port
• Ethernet AUI port
0$;
• 68040-based CPU board
• One CPU Transition board
• VME/VSB backplane with 4:4:4:4 processing
• One 32-bit Frame Buffer board (expandable to two)
• One Sync Generator board
• Dual Encoder board, or (depending on configuration)
one Encoder/one RGB board, or dual RGB boards
• Mix and FX board
• Transcoder board
• Three (9U) expansion slots
• 16 MB of system memory, expandable to 32 MB
• High capacity hard disk drive w/ one ext. SCSI port
• Two serial ports configurable for RS-232 or RS-422
• GPI (General Purpose Interface) port
• Ethernet Aui port
To Next Page