Chyron infinit! series - 17.4.6.1 Start; 17.4.6.2 End

iNFiNiT! Family Operation Manual
Revision D 17-21 Multiple Effects
 6WDUW
Start indicates the Start Point in fields for a particular
effect when Multiple Effects is executed.
1 second = 60 fields NTSC or PAL-M
1 second = 50 fields PAL
To enter or change a Start Point:
[ ] 1. Place the cursor on the desired buffer or
Mix
row, in the Start column.
[ ] 2. Press
CLR. Enter a Start Point from 0 to 9997
fields, then press

.
When
Start is changed, End also changes by the same
number of fields.
Len remains unchanged. The new
Start and End Points are reflected on the Multiple Effects
Time Line for that effect.
The Start Point can also be set in the Multiple Effects
Time Line window. See §17.7 for more information.
 (QG
End indicates the End Point in fields for a particular
effect when Multiple Effects is executed.
1 second = 60 fields NTSC or PAL-M
1 second = 50 fields PAL
To enter or change an End Point:
[ ] 1. Place the cursor on the desired buffer or
Mix
row, in the End column.
[ ] 2. Press
CLR. Enter an End Point from 0 to 9999
fields, then press

.
When
End changes, Len also changes by the same num-
ber of fields.
Start remains unchanged. The new End
Point and Length are reflected on the Multiple Effects
Time Line for that effect.