EasyManua.ls Logo

Chyron infinit! series - 9.5.1 Restrictions Using Serial Crawl; 9.5.2 Serial Crawl Font Height

Chyron infinit! series
978 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHYRON Corporation
Advanced Playback 9-62 Revision D
information on what has just been displayed on the
iNFiNiT! Family system. Examples of such data include
stock market quotes, election results, etc.
Serial data representing the characters to be displayed, is
read automatically from the serial port on an iNFiNiT!
Family system when Crawl is executed.
5
NOTE
In order to use Serial Crawl, you must
run a communications program as an
external source (such as a PC) to
send data to the serial port.
 5HVWULFWLRQV8VLQJ6HULDO&UDZO
Intelligent interface is not available while Serial
Crawl is active.
DO NOT ATTEMPT TO RUN
SERIAL CRAWL AND INTELLIGENT INTERFACE
SIMULTANEOUSLY!
No other Crawl commands are valid when Serial
Crawl is entered in the Crawl Control buffer.
Multi-row Crawls can not be run in a Serial Crawl.
Flash Font characters cannot be used in a Serial
Crawl.
 6HULDO&UDZO)RQW+HLJKW
The baseline of the Crawl row is determined by the cur-
rently selected font. If the current font is small and you
switch to a large font, the characters will either not align
on the baseline or pieces of characters could be truncated.
Make sure the baseline height and the descender height
5. Refer to the Intelligent Interface Handbook (Pub. No. 2A01989) for
more information on Serial Crawl.

Table of Contents