Chyron infinit! series - 9.6.1.2 Fade Out;In

CHYRON Corporation
Advanced Playback 9-72 Revision D
[ ] 1. Highlight the Speed field; press CLR; then
enter a number between
2 and 300 using the
Address Keypad. Default
Speed is 60 for
NTSC and PAL-M systems;
50 for PAL
systems.
60 fields = 1 second NTSC or PAL-M
50 fields = 1 second PAL
[ ] 2. Press

.
 )DGH2 XW,Q
You can choose to Fade In, Fade Out, or Fade Out/In
one or more messages. You must set the
In, Out or Out/
In
level for the selected Fade operation.
To set
Fade In, Out or Out/In:
[ ] 1. Highlight the
Fade field, then press the SPACE
BAR
or click the field to toggle through the
Fade choices. Default Fade is Out/In.
In Fades CHYRON VIDEO Output Percentage
level up from 0 to 100 percent (set
Percent
slider to 0).
Out Fades CHYRON VIDEO Output Percentage
level down from 100 to 0 percent (set
Percent
slider to 100).
Out/In First message fades out, then the next message
fades in (set
Percent slider to 100).
[ ] 2. After selecting the Fade operation, highlight
the Percent slider; press
CLR; then enter 0 or
100 using the Address Keypad as described
above; or use the mouse to drag the slider to
the desired position. Press

.