Chyron infinit! series - 9.7.3 Line-by-Line Slow Reveal

CHYRON Corporation
Advanced Playback 9-78 Revision D
When Enter speed to initiate slow reveal appears on
the Prompt Line:
[ ] 3. Enter a keypad number from
1 (slowest) to 9
(fastest) to start the Slow Reveal.
Current slow reveal speed n appears on the Prompt
Line.
n is the number entered on the Address Keypad.
The following commands can be used during Slow
Reveal execution:
 /LQHE\/LQH6O RZ5HY HDO
[ ] 1. Enter the ID number of a prerecorded message
using the Address Keypad.
[ ] 2. Press
SLOW REVL. Loading slow reveal
buffer
appears briefly on the Prompt Line.
[ ] 3. Press the
SPACE BAR or DO to select Line-by-
Line Slow Reveal.
[ ] 4. Enter a speed from
1 to 9 using the Address
Keypad each time you want to slow reveal a
line.
Table 9-13: Slow Reveal Execution Commands
.H\VWURNH &RPPDQG
Enter a new speed from
1 to 9
using the Address Keypad.
Changes the speed of the Slow Reveal at
any time.
Press
0. Pauses a Slow Reveal in progress.
Enter a speed from
1 to 9 using
the Address Keypad.
Restarts a Slow Reveal.
Press
ESC. Stops a Slow Reveal in progress.
Press the
SPACE BAR. Selects Line-by-Line Slow Reveal.