CHYRON Corporation
Multiple Effects 17-36 Revision D
Recall Pre is set up in the same manner as Recall fx
(§15.7.2) in the Read Effects window and
Recall Mix
(§16.17.2) in the Mix Effects main menu. Refer to these
sections for more information.
To use presets with Multiple Effects operations:
[ ] 1. If the presets are not stored as a message, but
are currently saved, skip to Step 2.
If presets are stored as a message, press
CLR,
then enter the ID number of the Preset
message.
[ ] 2. Place the cursor on the
Buf or Mix line that you
want to use the preset to change.
[ ] 3. Press
CNTL R or select Recall Pre, then type
the preset number in the
preset number: field
of the Restore Fx Presets window (if you are
changing the
Buf fields) or the Restore Mix
Presets
window (if you are changing the Mix
fields).
The proper window is displayed based on
which row the cursor is on.
[ ] 4. Press
.
The presets replace the current
Buf or Mix
settings on the selected row.
5HVHW
Reset allows you to restore the original settings from
when you entered the Multiple Effects main menu.
To reset the settings:
• Press
CNTL E or select Reset.
To Next Page
Loading...