Chyron infinit! series - 20.6.3.1 Record Video Input Configuration (RCD); 20.6.3.2 Read Video Input Configuration (READ)

iNFiNiT! Family Operation Manual
Revision D 20-21 Video Input Option
 5HFRUG9LGHR,QSXW 
&RQILJXUDWLRQ5&'
To record a Video Input Configuration:
• Press
RCD, then enter a file name. The file is stored
in the
SYSTEM/DRIVERS directory.
NOTE
The default name of this file is
VIDEO.DEF. If VIDEO.DEF is present
in the SYSTEM/DRIVERS directory,
the settings are automatically loaded
upon entry to the Video Input
Configuration menu.
If you save the settings under a different name, you may
recall them later via the
READ feature (described below.)
 5HDG9LGHR,QSXW 
&RQILJXUDWLRQ5($'
To recall a previously saved Video Input Configuration
setting:
• Press
READ. Then, when prompted, enter the file
name used to store the settings. Press
.
The system reads the saved settings into the menu.
NOTE
Settings saved using the default file
name VIDEO.DEF are recalled
automatically on entering the menu.