Chyron infinit! series - 17.10 Executing Multiple Effects; 17.10.1 Simple Multiple Effects Execution

iNFiNiT! Family Operation Manual
Revision D 17-37 Multiple Effects
 ([HFXWLQJ0XOWLSOH(IIHFWV
NOTE
When a DDR message is read during
the message load segment of
execution, the DDR clip is
automatically queued up.
It is not
necessary to queue the clip
beforehand.
Additionally, when successive
Multiple Effects messages containing
the same Transform Script are read,
the Transform Script is read only
once, to save loading time.
 6LPSOH0XOWLSOH(IIHFWV([HFXWLRQ
To execute Multiple Effects:
• Press
CNTL X or select Execute.
There is a delay of a few seconds before Multiple Effects
executes, depending on the complexity of the effect. To
execute the effect instantaneously, follow either of the
procedures in §17.10.4 or §17.10.5.
Remember that all messages (except for Transform
Scripts and Chyron Motion Files) used in a Multiple
Effects execution must reside in the current message
directory in Message Compose, and must be displayable
text, RGB messages, Roll or Crawl messages and/or a
DDR message. Additionally, all fonts must be loaded for
all messages. It is recommended that all messages used
in a Multiple Effects operation use the same font load.
See §6.7 for font load procedures.