Chyron infinit! series - 23.6 IMAGESTOR! Operations (CMF Only); 23.6.1 About IMAGESTOR! and CMF

CHYRON Corporation
Total Motion Control 23-40 Revision D
If the directory in which the file is stored is not the cur-
rent directory or in the directory specified in SCSI
Express Setup:
[ ] 1. Use the
Directory (D) function to change to the
directory in which the CMF is stored.
[ ] 2. Press
CLR; enter the ID number; then press
READ.
When a CMF completes execution, the final frame
remains on screen. To erase the image:
• Press
ESC or ERASE.
When a JPEG completes execution, the frame buffer is
cleared.
To halt CMF execution:
• Press
CNTL ALT ESC. The CMF stops execution,
and the image of the stopped frame remains on
screen.
To erase the image:
• Press
ESC or ERASE.
To halt JPEG execution:
• Press
CNTL ALT ESC. The JPEG stops execution,
and the frame buffer is cleared.
 ,0$*(67 252SHUDWLRQV 
&0)2QO\
  $ERXW  , 0$*(67 25 D QG &0 )
The Total Motion Control Panel menu can be accessed
from within IMAGESTOR!. Captures, Reads, and
Records can all be performed.