Chyron infinit! series - 6.7 Font Load Utility - Listing Fonts

CHYRON Corporation
Message Compose Basics 6-16 Revision D
 )RQW/RDG8WLOLW\/LVWLQJ)RQWV
If the Font Load utility window is not displayed:
• Press
CNTL F.
Font Load Utility functions are described below:
Displays a sample character of the highlighted
font in the list on the Edit Monitor.
Allows you to display a selected listing - by
name, ID, Font Size, Edge Size, Edge Type,
Edge Direction or any combination of these
parameters.
Enables you to change to a new directory, or to
list all directories stored on the current disk.
Displays the current contents of the 16 Font
Keys, and also shows available memory.
Erases all loaded fonts from font load memory.
The fonts are not erased from the disk.
NOTE
If a font directory becomes invalid
(e.g. from removal of removable
media or by setting Auto Change Font
Dir to Y in Directory Defaults),
Message Compose falls back on the
system default font directory (e.g. C/
MAX, C/MAXINE, C/INFINIT), so that it
is possible to re-access the Font Load
Utility menu. If the boot volume is not
valid, the system falls back on the
current font directory volume.
See
§8.2.2.4 for information on setting
directory defaults.
Display
D
Select List
S
Change Dir
C
Fnts Loaded
F
Erase All
E