Chyron infinit! series - 9.8.1 iNFiNiT!; 9.8.2 MAX!> and MAXINE!

CHYRON Corporation
Advanced Playback 9-82 Revision D
The Machine Control Option program (/SYSTEM/PRO-
GRAMS/DDR.OPT
) is required for DDR support in both
Message Compose and IMAGESTOR!.
To access the DDR Control menu, enter the Message
Compose main menu, then:
• Press
CNTL 9.
See the Machine Control Option Handbook (Pub. No.
2A01918) for more information on DDR operation.
 L1)L1L7
WARNING - iNFiNiT! USERS
Configuration of the Serial Port from
RS-232 to RS-422 on the iNFiNiT!
involves a jumper change on the CPU
Transition board. Failure to perform
the configuration can result in
equipment damage!
Please refer to
the Machine Control Option
Handbook (Pub. No. 2A01918) for
more information.
 0$;!DQG0$;,1(
NOTE
After proper installation, it may
happen that the following DDR Off
Line Warning is displayed on entering
the DDR Control menu:
Figure 9-21. DDR Off Line Warning
WARNING! - Press any key to continue.
DDR Device is Off LIne