Chyron infinit! series - 16.9 Executing a Mix Effect

CHYRON Corporation
Mix Effects 16-14 Revision D
CNTL R:
Allows you to recall the presets
recorded to a message in a directory (§16.17.2).
CNTL X:
If system is equipped with the
Transform option, this function sets the Mix
Priority for Transform (§16.16 and §17.6.3).
Transform allows you to display animated
Scripts, e.g., a spinning logo. See the Transform
manual, Pub. No. 2A01993 for more information.
CNTL Q:
Exits the Mix Effects main menu.
Settings are saved until exiting Message
Compose, or rebooting or turning off the system.
 ([HFXWLQJD0L[(IIHFW
Unless otherwise mentioned, information in this section
applies to a two buffer Single User system. You can fol-
low the same procedures using a Single User three buffer
system.
The following restrictions apply if a Dual User iNFiNiT!
is in use:
• Neither user of a two buffer Dual User system can
activate Key Enable. However, the Primary User can
activate
Bkg Select, and receives that background
from the Secondary user. The Primary User cannot
modify that background.
• The Primary User of a three buffer Dual User system
can activate
Key Enable. The Primary User can also
activate
Bkg Select, and receives that background
from the Secondary user. The Primary User cannot
modify that background. In addition, the Primary
User can use the Soft Mask function.
Recall Mix
R
Xform Enble
X
Quit
Q