CHYRON Corporation
Start-Up 3-46 Revision D
The RAM Reset Mode function resets the configuration
and memory allocation for the system memory used for
loading the Operating System and certain other pro-
grams. This function should only be performed under
the guidance of CHYRON Customer Service, or as
instructed.
([LWLQJ6HWXS0HQX4&17/(6&
To exit the Setup menu:
• Press
Q, CNTL, ESC or select Quit. This exits to the
Program Loader menu.
NOTE
Unless otherwise noted, any changes
made in the Program Loader Setup
menu do not become active until the
system has been rebooted.
• Press B or select the Reboot icon.
$VSHFW5DWLR;;
Message Compose can be set to display in 4 X 3 or 16 X 9
aspect ratio. All text and graphic operations automati-
cally adjust to display properly. Aspect Ratio is set in the
Message Compose Setup menu, not the Program Loader
Setup menu. For complete information, please refer to
§6.8.
0HQX/D\ RXW
Most iNFiNiT! Family functions are shown as icons
within menus on the Prompts Monitor. Icons are usually
first selected (highlighted), then activated, although some
are both selected and activated at the same time.
To Next Page
Loading...